Tempest Fugit – The Resurrection of Two of Hawkers’ Finest Fighters

A closer view of the partially re-assembled Tempest V, EJ693. Restoration magician, Andy Salter, is already hip deep into the restoration of this gem. (photo by Moreno Aguiari)
United Fuel Cells


Kermit Weeks two Tempests. The Tempest Mk.V EJ693 is the closer fuselage, while Tempest II prototype LA607 sits behind. Both aircraft are currently under restoration to fly in Polk City, Florida. (photo by Richard Snell)
Kermit Weeks two Tempests. The Tempest Mk.V EJ693 is the closer fuselage, while Tempest II prototype LA607 sits behind. Both aircraft are currently under restoration to fly in Polk City, Florida. (photo by Richard Snell)

Tempest Fugit – The Resurrection of Two of Hawkers’ Finest
by Richard Mallory Allnutt

The Hawker Tempest is one of the most revered ground attack aircraft of WWII, and yet so few of them survived beyond the mid-1950s. Despite several efforts to resurrect one of the awesome beasts to airworthy condition over the past four decades, none have made it past the finish line so far. However, a dedicated ex-pat Englishman, Andy Salter, is attempting to breathe new life into not just one, but two of these charismatic fighters at Kermit Weeks’ facility in Polk City, Florida. Mr. Weeks’ Tempests are the Napier Sabre-engined Mk.V variant, EJ693, and the Bristol Centaurus-powerd Mk.II prototype, LA607. Interestingly, the Tempest II never saw combat during WWII, unlike the Mk.V, which was actually the first of the type to enter service, beginning in January, 1944. They were the scourge of Nazi ground forces in Europe during the latter stages of the war, and one of the few aircraft fast enough to chase down the V-1 flying bombs as well.

Another view of the two fuselages. The Tempest V has only recently arrived from the UK, while the radial engined Tempest II has been in the USA since the 1980s. (photo by Moreno Aguiari)
Another view of the two fuselages. The Tempest V has only recently arrived from the UK, while the radial engined Tempest II has been in the USA since the 1980s. (photo by Moreno Aguiari)

As already noted, the Hawker Tempest is a rare breed indeed, with nine complete Mk.IIs and just two Mk.Vs extant. Other than LA607, all of the surviving Tempest IIs are former Indian Air Force examples, while the Tempest V’s served their time exclusively in the RAF. That being said, EJ693’s wings are actually from a former Indian Air Force Tempest Mk.II, and as such, have required modifications to bring them up to standard. The aircraft has a fascinating history, which is really beyond the scope of this article, but suffice to say it saw 21 combat missions with RAF 486 Squadron, mostly over the low countries. EJ693’s final combat patrol ended with a belly landing in Holland due to engine trouble, and thus her wartime flying days were over. Rather than scrap the Tempest though, an RAF team recovered the aircraft for further use as an engine test bed with RAF 151 Repair Unit at Wevelgem, near Brussels, Belgium. The outfit would mount newly rebuilt Napier Sabres to the ground-bound EJ693, and run the engines through their paces before returning them for front-line use. Following the war, the Technical College in Delft, Holland acquired EJ693’s fuselage, which ensured her eventual preservation. For a more detailed look at her history, please click HERE to visit Christer Landberg’s fabulous website dedicated to the Hawker Tempest.

A closer view of Tempest II Prototype LA607. (photo by Moreno Aguiari)
A closer view of Tempest II Prototype LA607. (photo by Moreno Aguiari)

Another view of LA607. (photo by Richard Snell)
Another view of LA607. (photo by Richard Snell)

While the Tempest II variant never saw combat in WWII, LA607 was the marque’s second prototype to fly, in September, 1943. She served primarily as a test aircraft with the Bristol Aeroplane Company during their development of the Centaurus radial engine, which powered the type in service. Following active use, LA607 passed on to the Cranfield College of Aeronautics, a prestigious British aviation university, which has become famous in the warbird world for having saved so many important British military aircraft. The Skyfame Museum acquired her in 1967, but when that museum folded in the early 80s, she moved to the Imperial War Museum at Duxford for display. Mr. Weeks acquired the aircraft at auction in 1983, and stepped in to provide the aircraft a new home in America. She has resided at several locations in Florida since then, finally moving to Polk City in the summer of 2014. The aircraft is in near-time-capsule condition, and will serve as an important reference during EJ693’s restoration, before undergoing the same treatment herself.

A closer view of the partially re-assembled Tempest V, EJ693. Restoration magician, Andy Salter, is already hip deep into the restoration of this gem.  (photo by Moreno Aguiari)
A closer view of the partially re-assembled Tempest V, EJ693. Restoration magician, Andy Salter, is already hip deep into the restoration of this gem. (photo by Moreno Aguiari)

Kermit Weeks has owned EJ693 for more than 20 years. She spent most of that time as an on-again-off-again restoration project at Personal Plane Services in the UK, where a good deal of her airframe received attention. This work included the recreation of the Tempest V’s iconic and famously complex radiator chin scoop, from scratch, by master sheet metal worker Mike Lamb using the RAF Museum’s example as a template. Much remains to be done though, including refurbishment of nearly all the myriad systems and internal fittings.

A view of the Tempest V's famous oil cooler chin scoop. Master sheet metal artist, Mike Lamb built this   insanely complex cowling from scratch, using the only original example, belonging to the RAF Museum's Tempest V, as a guide. (photo by Moreno Aguiari)
A view of the Tempest V’s famous oil cooler chin scoop. Master sheet metal artist, Mike Lamb built this insanely complex cowling from scratch, using the only original example, belonging to the RAF Museum’s Tempest V, as a guide. (photo by Moreno Aguiari)

In 2015, Mr. Weeks decided to bring his prize home to Polk City, and she made the journey by sea last October. Ironically, EJ693 was one of the first aircraft Andy Salter was involved with. In a recent conversation with WarbirdsNews he said, “When I started 35-40 years ago, this was almost the first aeroplane I got into, because I worked for Bianchi [at Personal Plane Services] all those years back… in the early 80’s. This just sat there. I knew what it was, but I was a kid. I HAVE to finish this [the Mk.V]… I have to at least get it to the point [where it’s ready to fly].”

The grey-green painted steel tubing that makes up the Tempest V's fuselage truss. This is from the cockpit section of EJ693, and while it looks perfect, it will all need to be stripped, corrosion-proofed, and repainted... in black, like the original. (photo by Moreno Aguiari)
The grey-green painted steel tubing that makes up the Tempest V’s fuselage truss. This is from the cockpit section of EJ693, and while it looks perfect, it will all need to be stripped, corrosion-proofed, and repainted… in black, like the original. (photo by Moreno Aguiari)

Inside the cockpit of Tempest II LA607. It is in near-time-capsule condition, and will serve as a guide to the reconstruction of Tempest V, EJ693. Note the original, black-painted cockpit. This will be replicated on EJ693 as well. (photo by Moreno Aguiari)
Inside the cockpit of Tempest II LA607. It is in near-time-capsule condition, and will serve as a guide to the reconstruction of Tempest V, EJ693. Note the original, black-painted cockpit. This will be replicated on EJ693 as well. (photo by Moreno Aguiari)

Andy Salter began sifting through the collection of parts and drawings that previous owner, Nick Grace, had gathered over the years. Salter started actively working on the project soon after. In January, 2016 he had the fuselage from LA607 moved in beside EJ693 to act as a quick reference for work on the Tempest V. While EJ693’s airframe is more or less structurally complete, Andy Salter has found that a fair bit of her fuselage truss needs reworking. “I’ve taken a lot of stuff off and refinished it,” he said, “because these tubes, they’re all steel. A lot of them had the light grey green, the cockpit green [paint]. There was no primer under it, so it was all rusting through. So I’ve redone a lot of that. The entire aeroplane was cockpit green right the way through, which it never should be. Most of the inside is this satin black,” he said pointing at the Tempest II’s untouched structure. “None of this stuff is on here permanently,” he continued. “I’m going to have to ‘black’ the cockpit interior at some point.”

The magnificent Napier Sabre on its stand. This is one of at least two complete examples of the profoundly rare engine in Kermit Weeks' collection.  (photo by Richard Snell)
The magnificent Napier Sabre on its stand. This is one of at least two complete examples of the profoundly rare engine in Kermit Weeks’ collection. (photo by Richard Snell)

Salter reckons that under the current circumstances, with only him working on the aircraft, that it will easily be ten years before he finishes the Mk.V, and that’s probably without working on the Napier Sabre engine. He doesn’t know whether he will be allowed to work on the Sabre, but he hopes so, because “that really is ultimately what I do. I am an engine guy. That’s why I rebuild a majority of Kermit’s more unusual engines…”

Another view of the massive, 24 cylinder Napier Sabre. (photo by Richard Snell)
Another view of the massive, 24 cylinder Napier Sabre. (photo by Richard Snell)

When asked if he really wants to tear down the massive 24-cylinder Sabre, Salter immediately responded, “I really do, and the other thing I want to do is to make the 200 plus unique tools and many more specialized cutters, fixtures etc., which will have to be produced as needed for it too. Because it’s all documented… Some of them I’ve already got. I’ve been collecting them, but…. there are some things that are fairly daunting. There’s basically a Sabre equivalent of the [Rolls-Royce] Merlin jacks, where you jack the banks off the top of the cases…There’s one for that engine and I swear it’s the size of a table tennis table. It’s huge! … I wanna do that!” Salter doesn’t want to deal with the Sabre’s massive, complex carburetor though. He says he’ll happily hand that over to Martin King, the carburetor guru at Mike Nixon’s Vintage V-12s engine shop in Tehachapi, California. Salter laughs, “I will say to Martin… there it is. Knock yourself out!” He thinks the biggest issue with the Sabre will be getting the drive train for the 24 sleeve valves sorted. At the close of our conversation, Salter laughs and says pointing at the Sabre, “That’s the funny thing to end the day on. There’s no electric starter that will fire this thing up.” It will have to be a Coffman starter with Cordite cartridges, “and where the hell do you get those things from these days. It’s a two gauge shotgun shell with no ammunition in it.” Like most things in the warbird world, someone will probably have to make them by hand, at great expense.

Andy Salter explaining the intricacies of the Sabre engine's Coffman starter, the four cartridge chambers of which can be seen beneath his hand. (photo by Moreno Aguiari)
Andy Salter explaining the intricacies of the Sabre engine’s Coffman starter, the four cartridge chambers of which can be seen beneath his hand. (photo by Moreno Aguiari)

While it is clearly going to be a long while before even the first Tempest is ready to fly again, we must understand the enormous commitment of Mr. Weeks’ resources, financial and otherwise, that these projects demand. He’s already lavished a small fortune on the Tempest V, and still has to invest considerably more. Any way you look at it though, it is great to see progress underway on these two beauties, and it will be a magnificent day when they fly again. WarbirdsNews will keep our readers up to date with periodic reports on their restorations. We must offer our deep thanks to both Andy Salter and Kermit Weeks of course for taking the time to talk with us, and wish them well in their endeavors!

5950b96b53fca257ead878469b70e12a?s=150&d=mp&r=g

Richard Mallory Allnutt's aviation passion ignited at the 1974 Farnborough Airshow. Raised in 1970s Britain, he was immersed in WWII aviation lore. Moving to Washington DC, he frequented the Smithsonian’s National Air & Space Museum, meeting aviation legends.

After grad school, Richard worked for Lockheed-Martin but stayed devoted to aviation, volunteering at museums and honing his photography skills. In 2013, he became the founding editor of Warbirds News, now Vintage Aviation News. With around 800 articles written, he focuses on supporting grassroots aviation groups.

Richard values the connections made in the aviation community and is proud to help grow Vintage Aviation News.

Array
About Richard Mallory Allnutt (Chief Editor) 1060 Articles
Richard Mallory Allnutt's aviation passion ignited at the 1974 Farnborough Airshow. Raised in 1970s Britain, he was immersed in WWII aviation lore. Moving to Washington DC, he frequented the Smithsonian’s National Air & Space Museum, meeting aviation legends. After grad school, Richard worked for Lockheed-Martin but stayed devoted to aviation, volunteering at museums and honing his photography skills. In 2013, he became the founding editor of Warbirds News, now Vintage Aviation News. With around 800 articles written, he focuses on supporting grassroots aviation groups. Richard values the connections made in the aviation community and is proud to help grow Vintage Aviation News.

15 Comments

  1. Insane amount of work and money needed here!

    The end result will justify it however!

  2. Massive fan of what these guys do – shame they can’t drop tools on the other restorations and put it all into this one.

  3. Just to say many thanks for you sharing this restoration project. I can’t imagine how it begins but one day I’d like to sit in on some projects but maybe not as extravagant and rare. Thanks

  4. Great project I would love to see.the mk v one day. My uncle was the pilot of. NV 973 who was killed on. March 28 1945.

  5. I grew up hearing about these planes and this engine in particular. My Grandad worked for Napier in the Acton workshop from 1933 until 1947.
    And in particular the workshop development of these engines. He also spent much time at Hawkers Langley factory as a Napier engineer helping to improve production line values for this engine.
    The moment that I learn you have this engine running( fingers crossed ) I’m on a plane to the states.
    Ironically my Grandad returned to his home in Kingston one evening to discover a V1 crater in his back garden and some of his roof missing !

    I wish I had paid more attention as a young boy

  6. Good piece.
    A couple of corrections though,
    since the (in the event) sole Tempest Mk I prototype – also
    powered by the Sabre – was on flight test prior to the Mk II.

    The Tempest Mk V prototype was develloped into the Mk VI,
    the final Tempest variant, which incorporated improvements
    introduced in the Mk II, such as ASI pitot tube, & oil-cooler
    both being located in the wing leading edge.

    While being a stickler for originality, it seems a pity
    that the wings used on the Mk V rebuild will revert to
    a more primitive state.

    Another point is that, since LA 607 is an original prototype,
    there is a risk that directly copying certain features may also
    be anachronistic for the production Mk V.

    As for the Coffman starter being a potentially problematic
    issue, the same system was used on the de Havilland Vampire,
    (& the same bloke, Frank Halford – designed the engines – for both),
    of which many are still flying – so it shouldn’t be a big ask to get
    the required cartridges…

    Any news of how the recent ah, Hurricane – impacted on the project?

  7. This is fantastic news I have long admired the Tempest II at the RAF museum at Hendon (and of course the MkV) and always wanted to see one fly, a direct comparison of the MkII to the Sea Fury would be very interesting. I may just get my wish.

  8. I was a wireless mechanic with 33 Squadron in Malaya 1948-49 and got up close and personal with our Tempests. They were great aircraft, very reliable. But we suffered on dispersal in the tropical sun. We called the starter Kaufman, not Coffman

    • Thanks so much for writing in Colin. We’d love to hear more about your experiences! I can only imagine how brutal the hot Malaysian sun must have been for you working out on the dispersal. Your use of the spelling Kaufman, rather than the more typical Coffman, is interesting too. I have not seen that before, so it makes for a useful, historical reference. Please do keep in touch!

      • I’m really pleased that someone is interested in my memories of Tempests in Malaya. I have lots of photos that I would like to share. I am thinking of making a website of the whole experience but would have to hurry – I am 87 now!Ganes

        • That would be marvelous Colin… I will send you a personal e-mail from my Warbird Digest account. Maybe we can talk a little more about it. Cheers. Richard Mallory Allnutt (WarbirdsNews editor)

  9. If you have seen the original ‘Flight of the phoenix’ they too having completed the monumental task of making a makeshift aircraft out of the crashed remain also had to use a Coffman starter and pronounced it as such rather than Kaufman (pronounced as cowfman)

Graphic Design, Branding and Aviation Art

Leave a Reply

Your email address will not be published.


*