It has been some time since we did an update on the restoration of Bob Jarrett’s Vought F4U-1 Corsair Bu.02270 at Parafield Airport, near Adelaide, Australia. As readers will know from our previous articles, this is the world’s oldest known Corsair in preservation, and it has been under rebuild to static condition for the past decade or so since Jarrett recovered her from a lagoon on Vanuatu in the South Pacific. While a lot of progress has been made on the airframe, this slowed to a trickle in the last year with the sad closure of Jarrett’s Classic Jets Fighter Museum, which was also located at Parafield. The small collection of beautifully preserved aircraft moved on to new locations, with the last of them (ex-RAN de Havilland Sea Venom WZ939) leaving the site in September, 2019. However, as we reported in the Sea Venom article, Bob Jarrett has retained the Corsair and is continuing its restoration in a hangar adjacent to his now-closed museum. The Corsair is under active restoration again, and Bob Jarrett recently updated us on what has happened up to this date…
Corsair Update for January 2020
Several windscreen and canopy plastics are currently being shaped. A canopy top front bulged plastic is in storage and when all plastics are on hand they will be fitted to the corsair cockpit. The canopy is currently fitted with aluminum panels for presentation reasons after they were used as first stage patterns.
A replica Corsair cockpit was fabricated some time ago with a view of all fittings. This can be seen by visitors rather than storing away unseen for a long time.
The non folding Corsair outer wings have been finally fitted, with joint panels fabrication well underway.
The second to be fitted starboard replica oil cooler is ready to be fitted after which the underside heat outlet doors and fairings will be fitted.
The Corsair control column is currently stored awaiting fitting. The column came from a Corsair raised from the seafloor off the east coast of Australia several years ago.
The outer wing ailerons and trim tabs have presented some fitment problems which will be resolved in the New Year.
The Pratt & Whitney R-2800 engine is cowled-up and awaits removal from its transport frame for work to be done on the supercharger casing. Once positioned horizontally, fabrication of the prepared cooling flaps actuating mechanisms and associated cabling will commence.
Bob
Many thanks indeed go to Bob Jarrett and to Phil Buckley for bringing us this update. We wish the project well, and look forwards to presenting further updates in the future!
Related Articles
Richard Mallory Allnutt's aviation passion ignited at the 1974 Farnborough Airshow. Raised in 1970s Britain, he was immersed in WWII aviation lore. Moving to Washington DC, he frequented the Smithsonian’s National Air & Space Museum, meeting aviation legends.
After grad school, Richard worked for Lockheed-Martin but stayed devoted to aviation, volunteering at museums and honing his photography skills. In 2013, he became the founding editor of Warbirds News, now Vintage Aviation News. With around 800 articles written, he focuses on supporting grassroots aviation groups.
Richard values the connections made in the aviation community and is proud to help grow Vintage Aviation News.
Is it ONLY being restored to static condition? What would it take to restore it to airworthiness condition?