Today in Aviation History: The first Production F4U-1 Corsair Made Its First Flight

Vought-Sikorsky F4U-1 Corsair, Bu. No. 02170, with test pilot Willard Bartlett Boothby, 24 October 1942. This is the twenty-fifth production F4U-1. (Rudy Arnold/National Air and Space Museum NASM-XRA-1294)
United Fuel Cells


by Bryan R. Swopes of This Day in Aviation

On June 24, 1942, the first production Vought-Sikorsky F4U-1 Corsair, Bu. No. 02155, made its first flight at Stratford, Connecticut. (Some sources state 25 June.)

The Corsair was designed by Rex Buren Beisel, and is best known for its distinctive inverted “gull wing,” which allowed sufficient ground clearance for its 13-foot, 4-inch (4.064 meters) diameter propeller, without using excessively long landing gear struts. The prototype XF4U-1, Bu. No. 1443, had first flown on 29 May 1940, with test pilot Lyman A. Bullard in the cockpit.

The F4U-1 had a length of 33 feet, 4.125 inches (10.163 meters), a wingspan of 40 feet, 11.726 inches (12.490 meters), and an overall height (to top of propeller arc) of 15 feet, 0.21 inches (4.577 meters). The wings’ angle of incidence was 2°. The outer wing had an 8.5° dihedral and the leading edges were swept back 4°10′. With its wings folded, the width of the F4U-1 was 17 feet, 0.61 inches (5.197 meters), and gave it a maximum height of 16 feet, 2.3 inches (4.935 meters). When parked, the Corsair’s 13-foot, 4-inch (4.064 meters) propeller had 2 feet, 1.93 inches (65.862 centimeters) ground clearance, but with the fighter’s thrust line level, this decreased to just 9.1 inches (23.1 centimeters). The F4U-1 had an empty weight of 8,982 pounds (4,074.2 kilograms) and a gross weight of 12,162 pounds (5,516.6 kilograms).

Vought Sikorsky F4U 1 Corsair Bu. No. 02170 with test pilot Willard Bartlett Boothby 24 October 1942. Rudy Arnold National Air and Space Museum NASM XRA 1301

The F4U-1 variant of the Corsair was powered by an air-cooled, supercharged, 2,804.4-cubic-inch-displacement (45.956 liters) Pratt & Whitney Double Wasp SSB2-G (R-2800-8) two-row, 18-cylinder radial engine, with a compression ratio of 6.65:1. The R-2800-8 had a normal power rating of 1,675 horsepower at 2,550 r.p.m. and 44.0 inches of manifold pressure (1.490 bar) at 5,500 feet (1,676 meters); 1,550 horsepower at 21,500 feet (6,553 meters); and 2,000 horsepower at 2,700 r.p.m. with 54.0 inches of manifold pressure (1.829 bar) for takeoff. The engine turned a three-bladed Hamilton Standard Hydromatic constant-speed propeller with a diameter of 13 feet, 4 inches (4.064 meters) through a 2:1 gear reduction. The R-2800-8 was 7 feet, 4.47 inches (2.247 meters) long, 4 feet, 4.50 inches (1.334 meters) in diameter, and weighed 2,480 pounds (1,125 kilograms).

The F4U-1 had a cruise speed of 186 miles per hour (299 kilometers per hour) at Sea Level. Its maximum speed at Sea Level was 365 miles per hour (587 kilometers per hour). During flight testing, an F4U-1 reached 431 miles per hour (694 kilometers per hour) at 20,300 feet (6,187 meters) with War Emergency Power. The service ceiling was 38,200 feet (11,643 meters) and its maximum range was 1,510 miles (2,430 kilometers) with full main and outer wing tanks.

Vought Sikorsky F4U 1 Corsair circa 1942. Rudy Arnold
Vought-Sikorsky F4U-1 Corsair, circa 1942. (Rudy Arnold)

The Corsair was armed with six air-cooled Browning AN-M2 .50-caliber machine guns, three in each wing, with 400 rounds of ammunition per gun.

A total of 12,571 Corsairs were manufactured by the Vought-Sikorsky Aircraft Division (F4U-1), Goodyear Aircraft Corporation (FG-1D), and Brewster Aeronautical Corporation (F3A-1). The Corsair served the U.S. Navy and Marine Corps in World War II and the Korean War. Corsairs also served in other countries’ armed forces. Its last known use in combat was in Central America in 1969.

Vought Sikorsky F4U 1 Corsair circa 1942. Rudy Arnold National Air and Space Museum NASM XRA 1329 1
Vought-Sikorsky F4U-1 Corsair, circa 1942. (Rudy Arnold/National Air and Space Museum NASM-XRA-1329)

This Day In Aviation Banner

Moreno-Aguiari

Born in Milan, Italy, Moreno moved to the U.S. in 1999 to pursue a career as a commercial pilot. His aviation passion began early, inspired by his uncle, an F-104 Starfighter Crew Chief, and his father, a military traffic controller. Childhood adventures included camping outside military bases and watching planes at Aeroporto Linate. In 1999, he relocated to Atlanta, Georgia, to obtain his commercial pilot license, a move that became permanent. With 24 years in the U.S., he now flies full-time for a Part 91 business aviation company in Atlanta. He is actively involved with the Commemorative Air Force, the D-Day Squadron, and other aviation organizations. He enjoys life with his supportive wife and three wonderful children.

Array
About Moreno Aguiari 3338 Articles
Born in Milan, Italy, Moreno moved to the U.S. in 1999 to pursue a career as a commercial pilot. His aviation passion began early, inspired by his uncle, an F-104 Starfighter Crew Chief, and his father, a military traffic controller. Childhood adventures included camping outside military bases and watching planes at Aeroporto Linate. In 1999, he relocated to Atlanta, Georgia, to obtain his commercial pilot license, a move that became permanent. With 24 years in the U.S., he now flies full-time for a Part 91 business aviation company in Atlanta. He is actively involved with the Commemorative Air Force, the D-Day Squadron, and other aviation organizations. He enjoys life with his supportive wife and three wonderful children.

Be the first to comment

Graphic Design, Branding and Aviation Art

Leave a Reply

Your email address will not be published.


*