XP-82 Twin Mustang – October, 2014 Restoration Update

Aircorps Art Dec 2019


Entire XP from rear

As usual, WarbirdsNews has received the latest XP-82 Twin Mustang restoration update from Tom Reilly at his workshop in Douglas, Georgia. Here’s what they’ve been up to this month! October saw some major milestones achieved in the XP-82 restoration!

Aft Fuselage Extensions/Dorsal Fins

The final microscopic alignments and attachment of the aft fuselage extensions are complete, along with all of the primary and secondary flight control pulley brackets, many phenolic cable guides and the tail wheel attachments. The team is now into fitting the two dorsal fins on the top of the aft fuselages where they flare into the vertical stabilizers.

VS. crop

Some of the many phenolic cable guides which run throughout the aircraft; these being in the rear fuselage. (photo via Tom Reilly)
Some of the many phenolic cable guides which run throughout the aircraft; these being in the rear fuselage. (photo via Tom Reilly)

Additional examples of the many phenolic cable guides which run throughout the aircraft; these being in the rear fuselage. (photo via Tom Reilly)
Additional examples of the many phenolic cable guides in the rear fuselage. (photo via Tom Reilly)

Forming the skin for one of the dorsal fins. (photo via Tom Reilly)
Forming the skin for one of the dorsal fins. (photo via Tom Reilly)

One of the dorsal fins under installation. (photo via Tom Reilly)
One of the dorsal fins under installation – note the skin piece from the previous photo being test fitted. (photo via Tom Reilly)

Canopies and Windshields

Both canopies are now permanently fit and attached. The canopy jettison systems are fully adjusted so that all three releases on each canopy release simultaneously. Both windshield frames and glare shields are now trimmed and permanently fitted, and await the four windshield side glasses. A second team is also attaching the fairings that fit underneath the aft section of both canopies. These fairings seal the canopies to the fuselages as the canopies roll forward.

The windscreen and canopy for the right hand fuselage in place. (photo via Tom Reilly)
The windscreen and canopy for the right hand fuselage in place. (photo via Tom Reilly)

Tom Reilly and another engineer fitting the left hand canopy. (photo via Tom Reilly)
Tom Reilly and another engineer fitting the left hand canopy. (photo via Tom Reilly)

Tom Reilly and another engineer fitting the left hand windscreen. (photo via Tom Reilly)
Tom Reilly and another engineer fitting the left hand windscreen. (photo via Tom Reilly)

 

Aileron Hinges

Fitting the ailerons to the XP-82’s wings is proceeding smoothly. This required the re-manufacture of new aileron hinge fittings on the four ailerons – the Twin Mustang has four ailerons, while the P-51 has just two – and all new hinge points that mount on the wings. Reilly’s team also had to machine the new gap seal extrusions that are on the upper and lower skins on the trailing edges of the aileron bays. Also, both of the outboard flap hinges are now complete. The engineers are fitting them on each wing.

Fitting the ailerons. (photo via Tom Reilly)
Fitting the ailerons. (photo via Tom Reilly)

Outboard flap hinges. (photo via Tom Reilly)
Outboard flap hinges. (photo via Tom Reilly)

One of the newly manufactured aileron fittings. (photo via Tom Reilly)
One of the newly manufactured aileron fittings. (photo via Tom Reilly)

Another view of one of the newly manufactured aileron fittings. (photo via Tom Reilly)
Another view of one of the newly manufactured aileron fittings. (photo via Tom Reilly)

The two aileron actuating forks are also now complete, and the last remaining items the team is waiting on for aileron controls are the four cable sectors, with two mounted in each wing. The sectors are the control wheels holding the aileron cables that move the ailerons up and down.

The newly fabricated aileron attachment forks. (photo via Tom Reilly)
The newly fabricated aileron attachment forks. (photo via Tom Reilly)

One of the two heat exchangers from Martin Radiator which recently arrived at the shop for installation. (photo via Tom Reilly)
One of the two heat exchangers from Martin Radiator which recently arrived at the shop for installation. (photo via Tom Reilly)

Gun Mounts All twelve gun mounts are now installed.

The gun mounts are now all fully installed in the wings. (photo via Tom Reilly)
The gun mounts are now all fully installed in the wings. (photo via Tom Reilly)

Another view of the gun mounts in the wings. Note the bays for the ammunition boxes at the top right. (photo via Tom Reilly)
Another view of the gun mounts in the wings. Note the bays for the ammunition boxes at the top right. (photo via Tom Reilly)

And that’s all for this month. Many thanks again to Tom Reilly for the update! You can learn more about the project on their blog HERE. Please be sure to check back with WarbirdsNews in early December for the next installation following the XP-82′s road to recovery!

5950b96b53fca257ead878469b70e12a?s=150&d=mp&r=g

Richard Mallory Allnutt's aviation passion ignited at the 1974 Farnborough Airshow. Raised in 1970s Britain, he was immersed in WWII aviation lore. Moving to Washington DC, he frequented the Smithsonian’s National Air & Space Museum, meeting aviation legends.

After grad school, Richard worked for Lockheed-Martin but stayed devoted to aviation, volunteering at museums and honing his photography skills. In 2013, he became the founding editor of Warbirds News, now Vintage Aviation News. With around 800 articles written, he focuses on supporting grassroots aviation groups.

Richard values the connections made in the aviation community and is proud to help grow Vintage Aviation News.

Array
About Richard Mallory Allnutt (Chief Editor) 1060 Articles
Richard Mallory Allnutt's aviation passion ignited at the 1974 Farnborough Airshow. Raised in 1970s Britain, he was immersed in WWII aviation lore. Moving to Washington DC, he frequented the Smithsonian’s National Air & Space Museum, meeting aviation legends. After grad school, Richard worked for Lockheed-Martin but stayed devoted to aviation, volunteering at museums and honing his photography skills. In 2013, he became the founding editor of Warbirds News, now Vintage Aviation News. With around 800 articles written, he focuses on supporting grassroots aviation groups. Richard values the connections made in the aviation community and is proud to help grow Vintage Aviation News.

2 Comments

  1. Thanks for the information of this restoration project.
    Also thanks to Tom Reilly and his co -workers for the beautiful work they have done so far.
    I `ve met Tom in his Restoration Museum way back in 2002 / 2003 on a vacation when he was working on the B-17 later known as ” Liberty Belle”.

    Heinz
    Germany

Graphic Design, Branding and Aviation Art

Leave a Reply

Your email address will not be published.


*